guy
Number of posts : 2310
Localisation : Belgique
Registration date : 2006-01-25
 | | Subject: Power control with ND Digital and other Digital systems 2/6/2011, 13:08 | |
| New hidden option since version 5.14:  by default PCLC consider that each hand controller is connected to a relay, when you set RelayOnHandController=0 it mean that you have only one relay connected to the power supply and when you set " at race end, all cars need to finish their lap" Pc Lap Counter will cut the power after ALL cars cross the S/F line. In the power control setting of Pc lap Counter , if you use the phidget interface PCLC will not allow you to use same output IO on multiple lane/car, two solutions: 1. if you always use car#1 in all races, then just set the output IO on lane 1 (car#1) 2. Use this tips : https://pclapcounter.forumotion.com/t647-phidget-interface-use-same-digital-output-io-for-different-lights (it's for starting lights, for power control modify the section [LANEPOWER])
Last edited by guy on 8/10/2014, 20:03; edited 2 times in total | |
|
djlutz
Number of posts : 54
Age : 49
Localisation : Castelldefels
Registration date : 2007-04-18
| | Subject: Re: Power control with ND Digital and other Digital systems 10/6/2011, 19:20 | |
|  Works awesome. Thanks Guy!  | |
|
