PCLC for event "new race"

I ask of "new race" with quick start.

When I use new race button PCLC show "race seting" focus is on number of laps. better it'll on "OK" button.

Is it possible to do it by arduino "button"?
But I detect that "[BT01]" don't work (remote "start" command)

zibi1 wrote:

But I detect that  "[BT01]" don't work (remote "start" command)

BT01 work, BT01 is to start the race and not setup the race !

I describe what I do, step by step:
1- run PCLC
focus is on "SSD Adwanced power base ..." (and would be right there on the main window)
2- fous change on main windows of PCLC
3- I press CTR + n (new race)
4- I make setup (it would be cool if fosus was "ok" they rarely change the settings, and PCLC remembers the last setting, difficult for me is to use mouse)
5- I choose the "ok"
6- I press ALT + 1 (at this location [BT01] does not work, on / off function does not work also )
race starts (then pause and restart function and on / off while the start is not required)
....
7- end of the race
8- I am able to start the race or a new race (resume and pause are inactive) but BT01 does not work, I have to manually press ALT + F1

And I do it several times over and over again.

I made a test by using com port toolkit and at point 6 BT01 work , so i suggest you check your arduino sketch

Hello GUJ
PT01 works!
I'm sorry for the confusion
I made a mistake in that first Arduino sketch waiting for a signal from the PCLC and later only allowed to send commands
Thank you for your help.
I also request assistance with my other problems. Probably somewhere I make a similar mistake.