Time after startlights

Hello,

When the startlights goes out there are a few seconds of time before the power goes on?
This is always after the first race.
First i click on start after the first heat i click on 10.0 and then ok after 5 sec.?

Greetz Robbert
www.src-fastlane.nl

Which version of Pc Lap counter ?
did the options "false start detection" is ticked ?
did the options "false start also during restart" is ticked ?
What kind of hardware you use to control the power ?
What kind of hardware you use for detection ?
What kind of Pc you have ? (Processor, Memory, windows version, etc...)

Pc lapcounter 4.57c
Ds 3000 -34 -56
Ds bridge
Trafo prof. handmade 6x 120VA
Computer XP prossesor?

Sorry i forget,

False start is on by start
Fals start is off by restart

Greetz Robbert van de Lagemaat

You forgot a important information: to control the power on each lanes i assume you use relay but your relay are connected to the parallel port, K8000 or to a Phigdet interface ?
Version 4.57c is little bit old...my first advice is to try the last version of Pc Lap Counter (version 5.04c).

We use a lpt interface, but first i shall try the latest version off the software.

Greetz Robbert

Thank for the information, i test it with version 5.04c and it's working fine: after the five lights goes red you have a random delay and when the five lights goes black the power goes immediately to on.
If you don't want the random delay between the red and black lights then you have to untick the option "false start detection".

Hello Guy,

The new software is running and ok, you were right false start off no delay false start on you have a delay.

Greetz Robbert